Security Camera World SCW-7709 Instrukcja Obsługi Pobierz pdf (Strona 14)

- 14 -

3. Installations

The installations described below should be made by qualified service personnel or

system installers.

3.1 Basic Connections

Please refer to the following diagram for the connections.

Please make sure to set the NTSC/PAL Selector Switch on the back panel

according to the local TV system for the digital video/audio recorder to work

correctly.

 Cameras

Connect the camera video input connectors to the video outputs from system

cameras or other composite video sources via coaxial cables.

 Main monitor

Connect the main monitor output connector (BNC or S-video) to a surveillance

TV monitor. The TV monitor displays selected live or recorded cameras in any

available split window format.

 Hard disk drive(s)

Make sure to install at least one hard disk drive inside the hard disk tray. If there

are two HDDs, please set both HDDs as (1) master for two independent cables, (2)

master/slave for one cable with two connectors, or (3) cable select. The settings

should be described on the HDDs or in the manuals come with the HDDs.

Note 1: Whether the upper HDD or the lower one is set as HDD#1 is fine for the

system. But it’s always a good habit to connect the upper one to

HDD#1 cable or set it as master for one cable with two connectors.

SCW-7709 & SCW-7716 Users Manual

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 88 89

Brak uwag

Security Camera World SCW-7709 Instrukcja Obsługi Strona 14